Stainless Steel Autoclaves

Technical Data

• Single Wall Construction, made up of S$304
• Working Temperature 121°C @ pressure 15 PSI.
• The Gasket is made of Superior quality Silicon rubber which is easily Replaceable. Electrically operated supplied with pressure gauge, safety valve and steam release valve. 

Manual Operated 

• High temperature Joint less silicon gasket 
• 1.S.I. Mark SS Heater
• Electrically operated Supplied with Two Safety Valves, Pressure gauge, Steam Release Valve, Drain Valve at botom.
• Foot lifting arrangement to open lid.
• Settable log/sterilization time interval. 

Semi - Automatic Operated 

• High temperature Joint less silicon gasket 
• 1.S.I. Mark SS Heater
• Digital Screen Display 
• Settable log/sterilization time interval. 
• Adjustable Soak Time in 1 min to 99 min. 

Fully Automatic Operated 

• High temperature Joint less silicon gasket
•  1.S.I. Mark SS Heater
• Digital Screen Display 
• Settable log/sterilization time interval. 
• Adjustable Soak Time in 1 min to 99 min.
• Low water level switch for heater protection
• Automatic Steam controlling in chamber, temp maintaining, sterilization time holding, Auto-Exhaust, Cycle end. 

Specification

• Sterilization at standard 121°C and 134°C cycles.
• Set values process values of temperature pressure will be shown on display screen.
• Vacuum pulsing and drying to achieve low Sterility Assurance Level (SAL).
• Automatic control of temperature, pressure values and all critical parameters.
• Reports auto generated in pen drive, hard disk or printer.

Ø  MOC: SS304 grade mirror finish

Ø  Operating Temperature: 121°C

Ø  Operating Pressure: 1.2 Kg/cm2

Ø  Gasket: Silicone airtight pressure proof gasket.

Ø  Heater: 6Kw

Ø  Pressure Gauge – 0 to 2 bar (1 no)

Ø  Safety Valve - Operating Pressure 1.2 Kg/cm2 (2 no’s)

Ø  Steam Release Valve - Manually Operated (1 no)

Ø  Auto Exhaust facility by Solenoid valve (1 no)

Ø   Validation & Calibration Port (2 no’s)

Ø  Vacuum Breaker Valve (1 no)

Ø  Temperature Sensor (1 no)

Ø  Led Indicators (2 no’s)

Ø  Digital Screen display (1 no)

Ø  Universal analog inputs.

Ø  Settable log/sterilization time interval.

Ø  Adjustable Soak Time in 1 min to 99 min.

Technical Data

• Single Wall Construction, made up of S$304


• Working Temperature 121°C @ pressure 15 PSI.


• The Gasket is made of Superior quality Silicon rubber which is easily Replaceable. Electrically operated supplied with pressure gauge, safety valve and steam release valve. 

Manual Operated 

• High temperature Joint less silicon gasket 


• 1.S.I. Mark SS Heater


• Electrically operated Supplied with Two Safety Valves, Pressure gauge, Steam Release Valve, Drain Valve at botom.


• Foot lifting arrangement to open lid.


• Settable log/sterilization time interval. 

Semi - Automatic Operated 

• High temperature Joint less silicon gasket 


• 1.S.I. Mark SS Heater


• Digital Screen Display 


• Settable log/sterilization time interval. 


• Adjustable Soak Time in 1 min to 99 min. 

Fully Automatic Operated 

• High temperature Joint less silicon gasket


•  1.S.I. Mark SS Heater


• Digital Screen Display 


• Settable log/sterilization time interval. 


• Adjustable Soak Time in 1 min to 99 min.


• Low water level switch for heater protection


• Automatic Steam controlling in chamber, temp maintaining, sterilization time holding, Auto-Exhaust, Cycle end. 

Top loading autoclave with single lever opening Wall conduction made up of $S304 / SS316, working Temp 121° C @ pressure 15 quick open & close lid. Easy to operate & Time consuming locking System.